Systems - Cisco1 and Cisco2

Basics

There are two central network switches, cisco1 and cisco2. They are configured identically, and only one switch is powered up and connected at any point in time. The other switch is kept on-site in the rack as a cold spare.

Purpose

Central network switch for CAcert.

Physical Location

In rack.

Logical location

The switch itself is not accessible over IP. Switch configuration must be performed over a serial connection, which is not connected in the rack.

Applicable Documentation

This is it :-)

Administration

Services

VLANs

Port configuration

Connected Systems

See SystemAdministration/CableIndex for an overview of the interconnections via this switch

Security

This switch is a critical system.

Configuration

Changes


SystemAdministration/Systems/Cisco1_and_2 (last edited 2013-11-15 11:41:56 by WytzevanderRaay)